Showing posts with label TCG box. Show all posts
Showing posts with label TCG box. Show all posts

Friday, September 25, 2015

DIY: Deck Box

Whether you're familiar with our products or new to our store, we thought it was about time to post a DIY on how we make our deck boxes. Many people have access to a Laser Cutter, and don't realize it. No, you don't have to go out and buy a $5,000 machine. Lots of places are public use, like hacker spaces. These sorts of places will let you come in and use their equipment for free! All you have to do is bring your own material/pay for the material you use (Specifically with the use of a 3D printer). Think it's about time to look up a hacker space near you?

Regardless of whether you plan on either buying a machine of your own, or investigating a hacker space, let's get to the good stuff!

We also have this DIY posted on Imgur, so if you've already seen it there, there isn't much reason to view it here.

Here's a finished view of what we're making in this DIY!
Finished product
We make Laser Engraved Deck Boxes!


Getting Started Engraving


Getting Started Engraving

Progress shots of the laser doing it's thing. We use Cherry Wood for all of our boxes currently, because of its durability as well as its beautiful color and characteristics. Please excuse how dirty everything is--things get dirty quickly when you're evaporating solids! And yes, we know our duct tape rocks.



If it weren't for the exhaust fan in the back, your entire room would be hazy with smoke. Trust me, I've accidentally forgotten to turn the exhaust on before.




Here's what it looks like when we set an image up to engrave. Yep, our laser is a Chinese laser.

Cutting


Cutting

Next the whole side is cut out.



The opposite side, engraved and cut out.



Here's what it looks like--we work with PLT files for our cuts.



We have various settings marked into the dial tape, for different materials/depths that we commonly use.



Through the looking glass. But seriously, don't open the lid while the laser is working. I was being bad before.



After a piece is cut out, we sand it with a dremel tool. One of the ways we go the extra mile with our products is sanding them smooth. A lot of people that sell laser engraved wood products don't sand out the burn that can clearly been seen, and detracts from the engraving. You can see a lot of burning in the piece on the right.



Things get pretty dusty. Advised: Don't wear dark colored pants or shirts when sanding your box pieces.



We brush off each piece, so the dust doesn't interfere with the gluing or final varnish. The piece on the right (skull) has been dusted off.



I used to sand all pieces all by hand, not having a decent solution to sanding efficiently. Then I discovered the magic of an oscillating precision sander... come to find out the motor burns out with too much use. I got through maybe 15 boxes before it went kaput.



Spoiled on the oscillating sander, I needed a tool that wasn't going to cost me $40 every 15 boxes. I splurged on a nice dremel.



Here's what a complete box looks like, laid out as they would fit together. The blank panels on the right go inside of the box, giving extra durability, rigidity, and gives a lip for the lid to close onto tightly. In some of our boxes, (Our Steampunk and Cthulhu boxes) we actually use these back panels as a focal point, cutting away parts of the front pieces to reveal the engraved back panels. It gives the boxes a little bit of neat extra dimension that doesn't affect the structural integrity of the box.



Glue time!

 Glue time!

This part is tricky, because if you don't manage to hold all of the pieces together while you're gluing, they'll all just sort of fall apart and collapse in your hands. So yes, the hand position you see is a professionally developed technique (not really) proven to be optimal for keeping the initial pieces together, and keeping the hands free from being covered in glue.



The lid it put together the same way. We always make sure that the same lid pieces match the body pieces, so the grain is exactly the same from lid to body.



All come together

 All come together

Completely glued box! It still looks really dusty, and it is still dusty, but only slight. Since the majority has been brushed off, the varnish will just soak into the remaining dust that you can't get out from the burned engraving, and become completely non-visible.



Now here's the part where you put the muzzle on your Veloc--err, the rubber bands on your box to make sure that nothing comes apart while curing. Although the Gorilla 2-part epoxy we use 'dries' in 5 minutes, things can still go awry if you don't wait a few hours for it to completely cure.



Clever girl.


Thanks for reading! If you want to see the box made in this DIY Album, you can check it out at http://lacersedge.lacernet.com















Tuesday, July 14, 2015

Back from Absence!

It's been a while since we last posted, but we've been making great headway with brand new designs. This post will be specifically related to our new Deck Box designs.

Depending on the design, each new box design can take anywhere from 4 to 12 hours of continuous work to completely finish and have ready to print. At the moment we're currently preparing these new designs to be photographed and listed on our store, but I can share with you all a glance at some preview images before they're turned into images that can be used for engraving.


Ornamental
The first design, and the first that I began designing of all four, is an ornamental design. It's designed to be generic enough to interest anyone looking for a deck box that doesn't cover any certain niche theme (As our Cthulhu boxes do, or even our Steampunk box to some degree), so it's suitable for any number of TCG or Board Game cards.

We also designed it to still be compatible with cards that may be labeled with a certain "color profile" as MTG, Pokemon, and Yu-Gi-Oh card decks have, being made of one or multiple different colors or types. To do this, we have 5 different variations that a customer may select from, where at the center of the box a hole is cut from is cut with 1-5 divisions that may each be colored with a designated color. The result of this will be better outlined in a later post about this box specifically that we'll be posting in the next few days.

Our old MTG Mana boxes used to offer this functionality with single or dual colors, but since we're no longer offering that box design in particular, we created a new design that better implemented multiple color options.

Here's a sneak peak at the new Ornamental design:


The above image shows the Front of the box (design on the left) and a side of the box (design on the right). Both images are mirrored on their opposite sides in the final product.

As you can see, the red lines on the bottom of the image are where the wood is cut out from the outside wall of the box, leaving just the surface of the inside panel exposed, where it's then painted with the desired colors.


Sci-Fi/Hi-Tech or Ars Technica
Our second design sings another tune, more themed than the previous design that fills the space of a Science Fiction or Faux-Hi-Tech vibe for a deck box. It's easy to see this deck holding cards from a game like Netrunner, whose theme revolves around a similar art aesthetic. 

The above image shows off the front and back image on the box (design on the left) as well as the lid of the box that customers at our Etsy store can get customized with their choice of text (design on the right)


Dragon
Our third design illustrates a fantasy favorite: Dragons! This particular dragon species is depicted on the front in a full illustration as well as on each side in silhouettes.
Again, the red outline shows where the front wall is cut out to reveal the painted inside panel of the customer's color choice. This leaves the background of the fully illustrated dragon a solid color, and the dragon's eye depicted on the back of the box to have it's own iris color to match.


Tempus Ex
Our fourth design goes a bit more simple with its illustration, bordered with a light steampunk theme that isn't as intense as our original steampunk design.
Front (design on top) and Back (design on bottom).



____
You can always check out our storefront here:
Email me: klink098@gmail.com
We love hearing people's questions and comments so please feel free to contact us either through email, this blog, or through our etsy page.